Gunpowder Totally Explained

Everything about Gunpowder totally explained

Gunpowder (also called black powder) is a pyrotechnic composition, an explosive mixture of sulfur, charcoal and potassium nitrate (also known as saltpetre or saltpeter) that burns rapidly, producing volumes of hot solids and gases which can be used as a propellant in firearms and fireworks.
Gunpowder is classified as a low explosive because of its slow decomposition rate and consequently low brisance. Low explosives produce a subsonic deflagration wave rather than the supersonic detonation wave produced by brisants, or high explosives. The gases produced by burning gunpowder generate enough pressure to propel a bullet, but not enough to destroy the barrel of a firearm. This makes gunpowder less suitable for shattering rock or fortifications, where high explosives such as TNT are preferred.

Gunpowder (black powder)

The term "black powder" was coined in the late 19th century to distinguish prior gunpowder formulations from the new smokeless powders and semi-smokeless powders. (Semi-smokeless powders featured bulk volume properties that approximated black powder in terms of chamber pressure when used in firearms, but had significantly reduced amounts of smoke and combustion products; they ranged in color from brownish tan to yellow to white. Most of the bulk semi-smokeless powders ceased to be manufactured in the 1920's.) Black powder is a granular mixture of

a nitrate—typically potassium nitrate (KNO₃)—which supplies oxygen for the reaction;
charcoal, which provides fuel for the reaction in the form of carbon (C);
sulfur (S), which, while also a fuel, lowers the temperature of ignition and increases the speed of combustion. Potassium nitrate is the most important ingredient in terms of both bulk and function because the combustion process releases oxygen from the potassium nitrate; promoting the rapid burning of the other ingredients. To reduce the likelihood of accidental ignition by static electricity, the granules of modern black powder are typically coated with graphite, which prevents the build-up of electrostatic charge.

The current standard composition for black powder manufactured by pyrotechnicians was adopted as long ago as 1780. It is 75% potassium nitrate, 15% softwood charcoal, and 10% sulfur. These ratios have varied over the centuries, and by country, but can be altered somewhat depending on the purpose of the powder.
   The burn rate of black powder can be changed by corning. Corning first compresses the fine black powder meal into blocks with a fixed density (1.7 g/cm³). The blocks are then broken up into granules. These granules are then sorted by size to give the various grades of black powder. In the USA, standard grades of black powder run from the coarse Fg grade used in large bore rifles and small cannon though FFg (medium and smallbore rifles), FFFg (pistols), and FFFFg (smallbore, short pistols and priming flintlocks). In the United Kingdom, the gunpowder grains are categorised by mesh size: the BSS sieve mesh size, being the smallest mesh size on which no grains were retained. Recognised grain sizes are Gunpowder 'G 7', 'G 20', 'G 40', and 'G 90'.
   A simple, commonly cited, chemical equation for the combustion of black powder is ť 2 KNO₃ + S + 3 C → K₂S + N₂ + 3 CO₂.

A more accurate, but still simplified, equation is ť 10 KNO₃ + 3 S + 8 C → 2 K₂CO₃ + 3 K₂SO₄ + 6 CO₂ + 5 N₂.

The products of burning don't follow any simple equation. One study's results showed that it produced (in order of descending quantities): 55.91% solid products: potassium carbonate, potassium sulfate, potassium sulfide, sulfur, potassium nitrate, potassium thiocyanate, carbon, ammonium carbonate. 42.98% gaseous products: carbon dioxide, nitrogen, carbon monoxide, hydrogen sulfide, hydrogen, methane, 1.11% water.
   Black powder formulations where the nitrate used is sodium nitrate tend to be hygroscopic, unlike black powders where the nitrate used is saltpetre. Because of this, black powder which uses saltpetre can be stored unsealed and remain viable for centuries provided no liquid water is ever introduced; muzzleloaders have been known to fire after hanging on a wall for decades in a loaded state, provided they remained dry. By contrast, powder that uses sodium nitrate, which is typically intended for blasting, must be sealed from moisture in the air to remain stable for long times.

Advantages

Smokeless powder requires precise loading of the charge to prevent damage due to overloading. With black powder, though such damage is still possible, loading can generally be carried out using volumetric measures rather than precise weight.
   Generally, high explosives are preferred for shattering rock; however, because of its low brisance, black powder causes fewer fractures and results in more usable stone compared to other explosives, making black powder useful for blasting monumental stone such as granite and marble.
   Black powder is well suited for blank rounds, signal flares, burst charges, and rescue-line launches.
   Gunpowder can be used to make fireworks by mixing with chemical compounds that produce the desired color.

Disadvantages

Black powder has relatively low energy density compared to modern smokeless powders and produces a thick smoke that can impair aiming or reveal a shooter's position.
Combustion converts less than half the mass of black powder to gas; the rest ends up as a thick layer of soot inside the barrel. In addition to being a nuisance, the residue from burnt black powder is hygroscopic and an anhydrous caustic substance. When moisture from the air is absorbed, the potassium oxide or sodium oxide turns into hydroxide, which will corrode wrought iron or steel gun barrels. Black powder arms must be well cleaned both inside and out to remove the residue.

Transportation

The UN Model Regulations on the Transportation of Dangerous Goods and national transportation authorities, such as United States Department of Transportation, have classified Gunpowder (black powder) as a Group A: Primary explosive substance for shipment because it ignites so easily. Complete manufactured devices containing black powder are usually classified as Group D: Secondary detonating substance, or black powder, or article containing secondary detonating substance, such as "Firework", "Class D Model Rocket Engine", etc, for shipment because they're harder to ignite than loose powder. As explosives, they all fall into the category of Class 1.

Sulfur-free gunpowder

The development of smokeless powders, such as Cordite, in the late 19th century created the need for a spark-sensitive priming charge, such as gunpowder. However, the sulfur content of traditional gunpowders caused corrosion problems with Cordite Mk I and this led to the introduction of a range of sulfur-free gunpowders, of varying grain sizes. They typically contain 70.5 parts of saltpetre and 29.5 parts of charcoal. The discovery of gunpowder was probably the product of centuries of alchemical experimentation. A Chinese alchemical text from 492 noted that saltpeter gave off a purple flame when ignited, providing for the first time a practical and reliable means of distinguishing it from other inorganic salts, making it possible to evaluate and compare purification techniques. By most accounts, the earliest Arabic and Latin descriptions of the purification of saltpeter don't appear until the 1200s.
The first reference to gunpowder is probably a passage in the Zhenyuan miaodao yaolüe, a Taoism text tentatively dated to the mid-800s:

Some have heated together sulfur, realgar and saltpeter with honey; smoke and flames result, so that their hands and faces have been burnt, and even the whole house where they were working burned down.

Contrary to popular belief, the Chinese didn't use gunpowder only for fireworks. In fact, the earliest surviving recipes for gunpowder can be found in the Chinese military treatise Wujing zongyao The formulas in the Wujing zongyao range from 27 to 50 percent nitrate. Experimenting with different levels of saltpetre content eventually produced bombs, grenades, and land mines, in addition to giving fire arrows a new lease on life. The 14th century Huolongjing contains gunpowder recipes with nitrate levels ranging from 12 to 91 percent, six of which approach the theoretical composition for maximal explosive force. and the manufacture of the oldest gun still in existence, a descendant of the earlier fire-lance, a gunpowder-fueled flamethrower that could shoot shrapnel along with fire. The Huolongjing text of the 14th century also describes hollow, gunpowder-packed exploding cannonballs.

Islamic world

Arabic chemists and engineers acquired knowledge of saltpetre—which they called "Chinese snow" (thalj al-Sīn)—and, soon afterward, of gunpowder; they also learned of fireworks ("Chinese flowers") and rockets ("Chinese arrows").

India

Gunpowder arrived in India by the mid-1300s, but could have been introduced by the Mongols perhaps as early as the mid-1200s.
   It was written in the Tarikh-i Firishta (1606-1607) that the envoy of the Mongol ruler Hulegu Khan was presented with a dazzling pyrotechnics display upon his arrival in Delhi in 1258 AD. Firearms known as top-o-tufak also existed in the Vijayanagara Empire of India by as early as 1366 AD.
   By the 16th century, Indians were manufacturing a diverse variety of firearms; large guns in particular, became visible in Tanjore, Dacca, Bijapur and Murshidabad. Guns made of bronze were recovered from Calicut (1504) and Diu (1533). Gujarāt supplied Europe saltpeter for use in gunpowder warfare during the 17th century. Bengal and Mālwa participated in saltpeter production.
   War rockets, mines and counter mines using gunpowder were used in India by the time of Akbar and Jahangir. Both Hyder Ali, and his son, Tippu Sultan used black powder technology in war rockets with considerable effect against the British.

Europe

The earliest extant written references to gunpowder in Europe are from the works of Roger Bacon. In Bacon's Epistola, "De Secretis Operibus Artis et Naturae et de Nullitate Magiae," dated variously between 1248, he states:

We can, with saltpeter and other substances, compose artificially a fire that can be launched over long distances... By only using a very small quantity of this material much light can be created accompanied by a horrible fracas. It is possible with it to destroy a town or an army ... In order to produce this artificial lightning and thunder it's necessary to take saltpeter, sulfur, and Luru Vopo Vir Can Utriet.

The last part has been interpreted as an elaborate coded anagram for the quantities needed, but it may also be simply a garbled transcription of an illegible passage.
   In the Opus Maior of 1267, Bacon describes firecrackers:The Liber Ignium, or Book of Fires, attributed to Marcus Graecus, is a collection of incendiary recipes, including some gunpowder recipes. Partington dates the gunpowder recipes to approximately 1300. One recipe for "flying fire" (ingis volatilis) involves saltpeter, sulfur, and colophonium, which, when inserted into a reed or hollow wood, "flies away suddenly and burns up everything." Another recipe, for artificial "thunder", specifies a mixture of one pound native sulfur, two pounds linden or willow charcoal, and six pounds of saltpeter. Another specifies a 1:3:9 ratio. Partington suggests that some of the book may have been compiled by Albert's students, "but since it's found in thirteenth century manuscripts, it may well be by Albert."
   By 1788, as a result of the reforms for which Lavoisier was mainly responsible, France had become self-sufficient in saltpeter, and its gunpowder had become both the best in Europe and inexpensive.
   The introduction of smokeless powder in the late 19th century led to a contraction of the gunpowder industry.

Britain

Gunpowder production in the British Isles appears to have started in the mid 13th century with the aim of supplying The Crown. Records show that gunpowder was being made, in England, in 1346, at the Tower of London; a powder house existed at the Tower in 1461; and in 1515 three King's gunpowder makers worked there. Henry VIII was short of gunpowder when he invaded France in 1544 and England needed to import gunpowder via the port of Antwerp.
The last remaining gunpowder mill at the Royal Gunpowder Factory, Waltham Abbey was damaged by a German parachute mine in 1941 and it never reopened. This was followed by the closure of the gunpowder section at the Royal Ordnance Factory, ROF Chorley, the section was closed and demolished at the end of World War II; and ICI Nobel's Roslin gunpowder factory which closed in 1954.
This left the sole United Kingdom gunpowder factory at ICI Nobel's Ardeer site in Scotland; it too closed in October 1976. The company was founded in 1802 by Eleuthère Irénée du Pont, two years after he and his family left France to escape the French Revolution. They set up a gunpowder mill, the Eleutherian Mills, on the Brandywine at Wilmington, Delaware based on gunpowder machinery bought from France and site plans for a gunpowder mill supplied by the French Government.. Tourists at Mammoth Cave, KY to this day are shown the vast deposits of bat guano, as well as the historic machinery use in its extraction and conversion to usable saltpetre for gunpowder from Revolutionary times right up to World War I.

Manufacturing technology

For the most powerful black powder "meal", a wood charcoal is used. The best wood for the purpose is pacific willow, but others such as alder or buckthorn can be used.
The ingredients are mixed as thoroughly as possible. This is achieved using a ball mill with non-sparking grinding apparatus (for example, bronze or lead), or similar device. Historically, a marble or limestone edge runner mill, running on a limestone bed was used in Great Britain; however, by the mid 19th century this had changed to either an iron shod stone wheel or a cast iron wheel running on an iron bed. The powdermakers would then shape the resulting paste of moistened gunpowder, known as mill cake, into "corns", or granules, to dry. Not only did "corned" powder keep better because of its reduced surface area, gunners also found that it was more powerful and easier to load into guns. Before long, powdermakers standardized the process by forcing mill cake through sieves instead of corning powder by hand.
During the 18th century gunpowder factories became increasingly dependent on mechanical energy.

Other uses

Besides its habitual use as an explosive, gunpowder has been occasionally employed for other purposes, After the battle of Aspern-Essling (1809), the surgeon of the Napoleonic Army Larrey combated the lack of food for the wounded under his care by preparing a bouillon of horse meat seasoned with gunpowder for lack of salt.

Further Information

Get more info on 'Gunpowder'.

External Link Exchanges

Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page:

<a href="http://gunpowder.totallyexplained.com">Gunpowder Totally Explained</a>

Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.
As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned.